Main Article Content

Iuskus Kiadi Manalu
Choirul Firmansyah
Muhammad Fadly Syam
Ahmad Syamil


Spare parts inventory management is very important for PT XYZ, which is one of the largest fertilizer producers in Indonesia. The cost of spare parts, especially for air compressors, constitutes a significant portion of the production cycle cost. This study aims to determine the optimal spare parts inventory value at PT XYZ by comparing the ABC analysis, fixed-time period, and reliability-centered spares (RCS) methods. The results showed that the fixed-time period method has a positive impact on company profits of Rp. 1,648,391,080 and offers better control of Class A spare parts inventory. The ABC analysis method also helps prevent inventory shortages that could disrupt company operations. However, the RCS method cannot be compared because the probability value must be determined by the company itself. In this study, demand fluctuations, lead time, reorder points, and inventory levels are also crucial considerations in determining the value of spare parts inventory. By using the fixed-time period method, PT XYZ can achieve greater profits and effectively control its spare parts inventory


Download data is not yet available.

Article Details

How to Cite
Manalu, I. K. ., Firmansyah, C. ., Fadly Syam, M. and Syamil, A. . (2024) “Comparison of inventory management methods: reliability centered spares (RCS), ABC analysis and fixed timed period ”, Jurnal Mantik, 8(1), pp. 122-131. doi: 10.35335/mantik.v8i1.4972.
Adenike, E. O. (2020). Abc Analysis and Product Quality of Manufacturing Firms in Nigeria. In Journal of Management Information and Decision Sciences (Vol. 24, Issue 1).
Alamri, T., & Mo, J. (2022). Optimising System Continuity in Preventive Maintenance Schedules Based on Integrated Failure Mode and Spare Part Inventory Modelling. International Journal of Reliability, Risk and Safety: Theory and Application, 5(2), 19–31.
Angelina, C. F., Atmaji, F. T. D., & Santosa, B. (2020). Spare part requirement and inventory policy for Rovema’s 1 machine using Reliability Centered Spare (RCS) and Min-Max stock methods. IOP Conference Series: Materials Science and Engineering, 722(1).
Bošnjakovi?, M. (n.d.). Introduction Uvod MULTICRITERIA INVENTORY MODEL FOR SPARE PARTS.
Chakravarthy, S. R., & Rao, B. M. (2021). mathematics Queuing-Inventory Models with M AP Demands and Random Replenishment Opportunities.
Dey, B. K., & Seok, H. (2024). Intelligent inventory management with autonomation and service strategy. Journal of Intelligent Manufacturing, 35(1), 307–330.
Gallego-García, S., Gejo-García, J., & García-García, M. (2021). Development of a maintenance and spare parts distribution model for increasing aircraft efficiency. Applied Sciences (Switzerland), 11(3), 1–21.
Gunasekaran, A., & Ngai, E. W. T. (2005). Build-to-order supply chain management: a literature review and framework for development. Journal of Operations Management, 23(5), 423–451.
Haeussler, S., Stampfer, C., & Missbauer, H. (2020). Comparison of two optimization based order release models with fixed and variable lead times. International Journal of Production Economics, 227, 107682.
Hanum, B., Haekal, J., & Prasetio, D. E. (2020). The Analysis of Implementation of Enterprise Resource Planning in the Warehouse Division of Trading and Service Companies, Indonesia. International Journal of Engineering Research and Advanced Technology, 06(07), 37–50.
Heizer, J., Render, B., & Munson, C. (Charles L. (n.d.). Operations management?: sustainability and supply chain management.
Lee, J., Ko, C., & Moon, I. (2024). E-commerce supply chain network design using on-demand warehousing system under uncertainty. International Journal of Production Research, 62(5), 1901–1927.
Mirzaei, D., Behbahaninia, A., Abdalisousan, A., & Miri Lavasani, S. M. (2023). Annual availability assessment of a gas turbine power plant using Monte Carlo simulation based on fuzzy logic and an adaptive neuro-fuzzy repair time prediction system. Journal of Thermal Analysis and Calorimetry, 148(16), 8675–8696.
Muhammad, K., Wicaksana, B. P., & Sibarani, A. A. (2023). Warehouse layout design with class-based storage approach to minimize material transfer distance. AIP Conference Proceedings, 2482(1), 090017.
Odedairo, B. O. (2021). Managing Spare Parts Inventory by Incorporating Holding Costs and Storage Constraints. Journal of Engineering, Project, and Production Management, 11(2), 139–144.
Patel, S. S., Surjith Shiva, M., Kataray, T., Srivastava, D., Maji, S., Kapruan, C., Kumar, P. P., Yarram, B., Chadha, U., & Selvaraj, S. K. (2022). Trends in tribological behaviour of materials for compressors. Journal of Physics: Conference Series, 2272(1).
Pinçe, Ç., Turrini, L., & Meissner, J. (2021). Intermittent demand forecasting for spare parts: A Critical review. Omega, 105, 102513.
Risyahadi (Universitas IPB - Indonesia), S. T., & Putri (Universitas IPB - Indonesia), H. Y. (2019). UPAYA IMPROVEMENT PENGENDALIAN PERSEDIAAN SUKU CADANG DENGAN METODE FIXED TIME PERIOD PADA PT XYZ. Jurnal Manajemen Industri Dan Logistik, 3(2), 129–140.
Stranieri, F., Fadda, E., & Stella, F. (2024). Combining deep reinforcement learning and multi-stage stochastic programming to address the supply chain inventory management problem. International Journal of Production Economics, 268, 109099.
Tookanlou, P. B., & Wong, H. (2020). Determining the optimal customization levels, lead times, and inventory positioning in vertical product differentiation. International Journal of Production Economics, 221, 107479.
Wen, Y., Liu, B., Zhang, Z., Shi, H., & Kang, S. (2024). Modeling and analysis for a repairable system with multi-state components under K-mixed redundancy strategy. Communications in Statistics - Theory and Methods, 53(2), 748–764.
Yamada, M., Badr, S., Udugama, I. A., Fukuda, S., Nakaya, M., Yoshioka, Y., & Sugiyama, H. (2022). A systematic techno-economic approach to decide between continuous and batch operation modes for injectable manufacturing. International Journal of Pharmaceutics, 613, 121353.
Zhang, S., Huang, K., & Yuan, Y. (2021). Spare parts inventory management: A literature review. Sustainability (Switzerland), 13(5), 1–23.
Zhu, S., Jaarsveld, W. van, & Dekker, R. (2020). Spare parts inventory control based on maintenance planning. Reliability Engineering & System Safety, 193, 106600.